Tel:742-138-8342
Email:uksales@anson-mpe.com
Continuous Operation Type Dry Bead Mill
Continuous Operation Type Dry Bead Mill
DRYSTAR SDA1
The Only Desktop Type Continuous Dry Bead Mill in the Industry
The DRYSTAR SDA1 achieves submicron-size particles by dry grinding without classifiers.
This machine has a 100 times better grinding ability compared to ball mills.
A trial can be started from 0.5L as a minimize volume.
User friendly design.
Structual drawing/Feature
Achieving submicron-size particles by dry grinding
Capable of testing 0.5 L as a minimum sample volume
Particle diameter of 10 μm at maximum without using classifiers
100 times better grinding ability compared to ball mills
Process Examples
Dry bead mills | Wet bead mills | |
Bead diameter | Φ1.5 – 8mm | Φ0.03 – 2mm |
Shaft seal | Easy | Precision |
Material wear | Low | High |
Re-agglomeration | More likely | Less likely |
Particle compounds | Good | Possible |
Mechanochemical effect | Large | Extremely small |
Applications
Mohs hardness | Materials |
7 – 9 | Quartz, silica, soft ferrites, hard ferrites, carrier ferrites, alumina, silicon nitride, iron oxide, tungsten oxide, sodium silicate |
4 – 6 | Glass, carbon, black silica, blast furnace ash, fly ash, burned ash, organogermanium |
Less than 4 | Gypsum, magnesium hydroxide, aluminum hydroxide, barium titanate, PZT, powdered green tea, rice flour |
Specifications
Model | SDA1 – SDA500 |
Motor | 3.5kW – 200kW |
Grinding chamber volume | 1.0L – 500L |
Bead diameter | φ1.5 – 8mm |
Microfluidizer Nanotechnology Limited, Company number: 13114417
| 
|
